Omni Stab Tip Cap
Omni Stab Tip Cap – DIY parts for omni reblades. Use with an omni tube to retip a foam bat.
These come with the reblade omni tubes. We like to cut our 24″ reblade tubes into 4x 6″ tubes to just reblade only the tips of weapons. If you want to try our trick, then you also need more stab tip caps. The light grey square is 2lb foam. The dark black square is the squishy ensolite stab tip. You need both pieces to correctly finish an omni weapon reblade.
After you receive this foam, carefully dap the two pieces of foam together. Then dap the thinner lighter piece to the tube (already on the core). After the glue sets, cut the square down to the proper round size/shape. Make sure the finished diameter is close to the diameter of the tube. It must be atleast 2.5″ wide to pass dagorhir weapons check.
| stab tip kind | black ensolite only, grey 2lb foam only, set of both foam tips |
|---|---|
| stab tip size | normal 2.5-3" for blue and red tubes, xl 3.5" wide for black tubes |
Misty –
Great pick up for building new bats and repairing old ones. The foam can be cut using a hot wire cutter which is very convenient.